FC-ESC Stacks
Gemfan Hurricane 7043 3-Blade
₹410.00
Gemfan Hurricane 7043 3-Blade Midnight Black is a high-performance 7-inch FPV racing propeller designed for responsive acceleration, precise cornering, and reliable flight control. Developed in collaboration with Street League, this polycarbonate (PC) propeller features a 4.3-inch pitch, 5mm mounting hole, and lightweight construction for competitive FPV racing drones.
Gemfan Hurricane 7043 3-Blade Midnight Black
| 20mm | |
| Recommended Motors | 2808 and RAY12 |
| Available Colors | Midnight Black, Whisky, Neon Yellow, Clear Pink |
| Application | FPV Racing and Performance Drone Builds |
Key Features of Gemfan Hurricane 7043
1. Designed for Competitive FPV Racing
The Gemfan Hurricane 7043 Tri-Blade Propeller was developed in collaboration with Street League for demanding FPV racing environments.
Its racing-oriented blade geometry is designed to support responsive handling, controlled turns, and effective acceleration during competitive flights.
2. High-Performance Tri-Blade Design
The three-blade configuration provides a balance between grip, thrust response, and flight control.
The propeller is intended for racing applications where pilots require predictable handling during rapid directional changes and high-speed maneuvers.
3. Optimized 4.3-Inch Pitch
The 4.3-inch pitch helps provide responsive acceleration and effective use of motor RPM.
This makes the Gemfan 7043 Propeller suitable for performance-oriented FPV builds, particularly those designed for competitive racing rather than slow cruising.
4. Durable Polycarbonate Construction
Manufactured from polycarbonate (PC), this 7-inch FPV propeller offers a combination of strength and flexibility.
The material is selected for demanding flight conditions where durability, low rotating mass, and consistent handling are important considerations.
5. Compatible with 2808 and RAY12 Motors
Gemfan recommends 2808 and RAY12 motors for the Hurricane 7043 propeller.
Its 5mm mounting hole supports compatible motor shafts. Builders should confirm motor specifications, shaft compatibility, battery voltage, and available frame clearance before installation.
6. Street League Racing Development
The Gemfan X Street League 7043-3 was developed with input from Street League developers.
According to Gemfan, this propeller was used by podium-finishing pilots at a Street League racing event.
Its design emphasizes pre-turn grip, acceleration, and responsive control.
Applications of Gemfan 7043 Tri-Blade Propeller
The Gemfan Hurricane 7043 is designed for several FPV drone applications:
- 7-Inch FPV Racing Drones: Suitable for racing-focused quadcopters requiring fast throttle response.
- Street League Racing: Developed for the handling requirements of competitive Street League events.
- High-Performance FPV Builds: Appropriate for custom drone platforms using compatible motors and mounting systems.
- FPV Racing Practice: Useful for pilots developing control skills, cornering techniques, and acceleration management.
- Custom Racing Drone Projects: A practical option for builders developing 7-inch performance quadcopters.
Why Choose the Gemfan Hurricane 7043?
The Gemfan Hurricane 7043 combines a racing-focused design with the benefits of polycarbonate construction.
Its 7-inch diameter and tri-blade configuration make it an option for pilots seeking responsive control in competitive FPV environments.
Unlike propellers designed primarily for gentle cruising or maximum endurance, the Hurricane 7043 prioritizes acceleration, grip, and racing performance.
The 10.3g weight per propeller and carefully developed blade geometry contribute to its handling characteristics.
Performance will depend on the complete drone setup, including motor selection, battery configuration, frame weight, electronic speed controller settings, and flight conditions.
Motor and Installation Compatibility
Before installing the Gemfan Hurricane 7043 Tri-Blade Propeller, verify that your drone frame provides adequate clearance for 7-inch propellers.
The motor must support the propeller’s diameter, pitch, and rotational load.
Gemfan lists 2808 and RAY12 motors as recommended options, but actual compatibility also depends on the motor’s KV rating, battery voltage, and manufacturer limits.
Check the mounting shaft diameter and ensure the propeller is properly secured before flight.
Inspect each propeller for visible cracks, deformation, or other damage before installation. Replace damaged propellers rather than attempting to repair them.
Buy Gemfan Hurricane 7043 in India at RC Store Hub
Looking for the Gemfan Hurricane 7043 or other 7-inch FPV drone propellers in India?
RC Store Hub supplies FPV drone components, RC electronics, motors, frames, propellers, batteries, and accessories for drone enthusiasts and professional builders.
Whether you’re assembling a custom racing quadcopter or replacing propellers on an existing FPV drone, selecting compatible components is essential for reliable performance.
Explore Gemfan propellers and other FPV drone accessories through RC Store Hub.
Website: https://rcstorehub.com
For product enquiries, availability, and bulk orders, contact RC Store Hub.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Gemfan 7036F Folding 2-Blade Black
The Gemfan 7036F-2 is a 7-inch bi-blade folding propeller made from high-strength Glass Fiber Nylon, designed for portable and high-performance drones. Featuring a 3.6-inch pitch, 177.8 mm diameter, and weighing 5.5 g, it combines lightweight construction with durable blades for reliable flight. The folding mechanism reduces transport size and enhances portability while maintaining stiffness and thrust efficiency. Equipped with a 5 mm center hole, it is compatible with 2806.5 1350KV-class motors. Available in Black.
Gemfan Cinelifter 7037 Reinforced PC 3-Blade Clear Black
The Gemfan Cinelifter 7037 tri-blade propeller is offered in three distinct material options—Polycarbonate (PC), Glass Fiber Nylon, and Carbon Fiber Nylon—to meet diverse performance priorities and strength requirements across various demanding flight scenarios. Its 3.7-inch pitch, combined with a tri-blade layout, delivers sustained and robust power support during medium to high-speed flight. This makes it particularly suitable for professional aerial cinematography and heavy-lift drone applications where powerful, reliable, and consistent thrust is essential.
Gemfan Flash 7040 3-Blade Black
The Gemfan Flash 7040 tri-blade propeller is engineered to achieve an optimal balance between lightweight construction and superior aerodynamic efficiency, delivering exceptionally smooth and sustained power output. It is ideally suited for extended-range FPV cruising, cinematic aerial platforms, and other applications that prioritize gentle, stable, and enduring flight performance.
Gemfan Hurricane 7035 Reinforced PC 3-Blade Black
The Gemfan Hurricane 7035 is a 7-inch tri-blade propeller crafted from durable Polycarbonate (PC), engineered for versatile flight applications. It successfully balances smooth, efficient power delivery with responsive and predictable aircraft control. Ideal for daily cruising, medium-to-long-range FPV flights, and light freestyle maneuvers, it serves as a practical, stable, and reliable general-purpose choice for 7-inch platforms.
Reviews
There are no reviews yet.